Shutting down the projector, Shutting down the – InFocus XS1 User Manual
Page 42
Operation
42
Shutting down the projector
1.
Press
Power and a confirmation
message will display prompting you.
If you don't respond in a few seconds, the
message will disappear.
2.
Press
Power a second time. The
Power indicator light flashes orange, the
projection lamp shuts down, and the fans
will continue to run for approximately 90
seconds to cool down the projector.
CAUTION
•
To protect the lamp, the projector will not respond
to any commands during the cooling process.
•
To shorten the cooling time, you can also activate
the Quick cooling function. See
for details.
3.
Once the cooling process finishes, the Power
indicator light is a steady orange and fans
stop. Disconnect the power cord from the wall
socket.
If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power
again to start the projector after the fans stop and the
Power indicator light turns orange.
I
I
I
I