beautypg.com

Fine-tuning the image quality in user modes, Adjusting brightness, Adjusting contrast – InFocus XS1 User Manual

Page 35: Adjusting color, Adjusting tint, Adjusting sharpness

background image

Operation

35

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions

available when User 1 or User 2 is selected. You can make adjustments to these

functions based on your needs.

Adjusting Brightness

Highlight Brightness in the PICTURE menu and
adjust the values by pressing

/

on the

projector or remote control.

The higher the value, the brighter the image. And

lower the setting, darker the image. Adjust this

control so the black areas of the image appear

just as black and that detail in the dark areas is

visible.

Adjusting Contrast

Highlight Contrast in the PICTURE menu and
adjust the values by pressing

/

on the

projector or remote control.

The higher the value, the greater the contrast.

Use this to set the peak white level after you have

previously adjusted the Brightness setting to suit

your selected input and viewing environment.

Adjusting Color

Highlight Color in the PICTURE menu and adjust the values by pressing

/

on

the projector or remote control.

Lower setting produces less saturated colors; setting to the minimum value makes

the image black and white. If the setting is too high, colors on the image will be

overpowering, which makes the image unrealistic.

Adjusting Tint

Highlight Tint in the PICTURE menu and adjust the values by pressing

/

on

the projector or remote control.

The higher the value, the more reddish the picture becomes. The lower the value,

the more greenish the picture becomes.

Adjusting Sharpness

Highlight Sharpness in the PICTURE menu and adjust the values by pressing

/

on the projector or remote control.

The higher the value, the sharper the picture becomes. The lower the value, the

softer the picture becomes.

+50

+30

+70

+50

+30

+70