IBM 31P6260 - Manual (Page 22)

20
Troubleshooting
If you have a problem setting up or using your monitor, you may be able to
solve it yourself. Before calling your retailer or IBM, try the suggested actions
that are appropriate to your problem.
Problem
Possible
Cause
Suggested Action Reference
Screen is blank
and power
indicator is off
No power to
monitor
!
Ensure that the
electrical outlet and the
monitor are both switched
on.
!
Check that the power
cord is firmly plugged into
the electrical outlet and the
power supply unit.
!
If the power cord plug
has a removable fuse,
replace it.
!
Try another power
cord.
!
Try another electrical
outlet.
Connecting
your monitor
section
Screen is blank
and power
indicator is
steady green Brightness
and Contrast
may be too
low
!
Adjust brightness and
contrast.
User controls
section
Screen is blank
and power
indicator is
steady amber
The monitor is
in the Power
Management
Standby or
Suspend or
Off state
!
Press any key on the
keyboard or move the
mouse to restore
operation.
!
Check the Power
Management software on
your computer
Power
Management
section
T50_setup.fm Page 20 Thursday, August 9, 2001 11:09 AM