Motorola BLE*/* - Manual (Page 44)

BLE*/* Installation and Operation Manual
Appendix A
Specifications
Specifications are valid over the given passband and operating temperature range of
−40°F to
+140
°F (−40°C to +60°C). Specifications stated are typical unless otherwise noted, and are
subject to change. Refer to the Motorola BCS web site or contact your account representative for
the latest specifications.
Model BLE87S/H*
Specification Forward Amplifier
Passband (S-split) 52 through 870 MHz
Gain
Full 36 dB (with SFE-*-*)
Operational 32 dB (with SFE-*-* and slope reserves)
Flatness
52 through 870 MHz ±0.70 dB maximum
Level control, automatic Bode board using ADU/TDU
Gain control Fixed pads, JXP- ∗B
Performance - reference frequency
(MHz) 870/550/52
at typical output (dBmV) 43/44/37
Channels 79 analog/320 MHz digital (suppressed by 6 dB)
Crossmod (worst case) –63 dB
CTB (worst case) –74 dB
CSO (worst case) –74 dB
Noise figure
at 52 MHz 9 dB (with SFE-1) maximum
at 870 MHz 10 dB (with SFE-1) maximum
Interstage equalizer, 8LDR/8/H/III 8 ±1 dB
Hum modulation –65 dB
Return loss, input/output 16 dB minimum at operational level
Test points, input/output 20 ±0.7 dB
Housing dimensions 10.6 L × 8.0 W× 4.7 D inches (26.9 Ч 20.3 Ч 11.9 cm)
Weight 7.2 pounds (3.2 kg)