Motorola BLE*/* - Manual (Page 13)

2-2 Overview
BLE*/* Installation and Operation Manual
Configuration
The BLE*/* is fully configured in the Motorola factory per customer request. It is recommended
that you verify the configuration listed on the outside of the shipping carton with the
configuration you ordered. The shipped configuration is also noted on labels located on the side
of the housing and the side of the electronics module.
Figure 2-2
BLE*/* configurator
Key
E Ergonomics
Ergonomics
Key
X Reserved
Reserved
Key
X Reserved
Reserved
Key
X Standard
Chromate
Chromate w/ SS plugs
Epoxy
C
S
P
Housing Finish
Key
X None
TDU
ADU-499.25/S
ADU-439.25/S
ADU-403.25/S
ADU-445.25/S
ADU-549.00/S
QADU-609.00/S
T
A
B
C
D
E
Q
Level Control
BLE
/ - - - - - -
Key
X Standard
Deep lid for status monitor
None (Electronics only)
D
N
Housing Size
Key
X 20A Auto Fuse
Shunt
S
Overcurrent Protection
Key
X Surge Arrestor
FTEC; Crowbar
C
Voltage Surge Protector
Key
G
High Gain E-GaAs (High Output w/32 dB Gain)
E-GaAs (High Output w/28 dB Gain)
H
Hybrid Technology
Key
X
H 8 [Fmin-870 MHz]
12 [Fmin-870 MHz]
Station Slope
Key
X Reserved
Reserved
Key
X Standard (15 Amp)
Low Current (10 Amp)-
available for electronics
package only
L
AC Current Capability
Key
B Ingress Control Switch
None
X
Ingress Switching
Key
X No Return
Low Gain Hybrid
High Gain Hybrid
L
H
Return Amp w/JXP-ZXs
Key
5-40 MHz, 52-870 MHz
5-55 MHz, 70-870 MHz
5-65 MHz, 85-870 MHz
5-42 MHz, 54-870 MHz
5-30 MHz, 47-870 MHz
87S
87J
87A
87K
87E
Frequency Range