MITSUBISHI ELECTRIC QA6ADP - Manual (Page 13)

12
(2) Removal of the QA6ADP
The following shows procedures for removing the QA6ADP from the
extension base unit.
Mounting bracket fixing screw
Disconnect an extension cable form the
QA6ADP.
Remove the adapter module mounting
screws of the QA6ADP at two parts (top
and bottom).
Remove the QA6ADP main body from the
extension base unit.
Remove a board fixing screw and an
adapter module mounting bracket of the
QA6ADP.
Mount a screw fixing the board of the
extension base unit at two parts on the left.
Completed
QA6ADP
Board fixing screw
Adapter module
mounting
bracket
Mounting
guide
Adapter module
mounting
screw
Adapter module
mounting screw
Extension
base unit IN
side connector
Please a base cover over the extension
base unit.