2 extension stage number setting – MITSUBISHI ELECTRIC QA6ADP User Manual
Page 11
10
4.2 Extension Stage Number Setting
Set the number of extension stages to both the QA6ADP and the extension
base unit.
The same stage number should be set to both the stage number setting
connector of the extension base unit and that of the QA6ADP.
POINT
Set any number of 1 to 7 which matches to the number of extension stages
for the stage number setting connector setting. If the stage number setting of
the QA6ADP and that of the extension base unit is different, the two or more
settings are made to one stage, the same stage number is duplicated, or no
setting is made to the number of stages, incorrect input or incorrect output will
occur.
(1) Extension stage number setting of the QA6ADP
The following describes how to set the number of extension stages of the
QA6ADP.
Extension stage number setting
1
st
stage
2
nd
stage
3
rd
stage
4
th
stage
5
th
stage
6
th
stage
7
th
stage
Stage number
setting connector
setting
(2) Extension stage number setting of the extension base unit
Remove a base cover from the
extension base unit.
Completed
Insert a connector pin into the place of
the stage number selected from 1 to 7
of the connector (CON3) at bottom left
of the base unit.
Stage number setting connector
Extension stage number setting
1
st
stage
2
nd
stage
3
rd
stage
4
th
stage
5
th
stage
6
th
stage
7
th
stage
Stage number
setting connector
setting