Minolta Dimage F100 - Manual (Page 96)

Basic Custom1 Custom2
Setup
LCDbrightness
Format
Power save
Language English
3 min.
–
–
96
To access the menu, simply turn the mode dial to the setup position. The four-way keys of the con-
troller are used to move the cursor in the menu. The central button of the controller will enter a set-
ting.
Once a setting has been
selected, the cursor will
return to the menu
options and the new
setting will be displayed.
Setting can continue to
be made.
S
ETUP MODE
Navigating the setup menu
Press the central button of the
controller to select the
highlighted setting.
The “Basic” tab at the top of the menu will be highlighted. Use the left/right keys of the
controller to highlight the appropriate menu tab; the menu will change as the tabs are
highlighted.
When the desired menu section is displayed, use the up/down keys to scroll through the
menu options. Highlight the option whose setting needs to be changed.
With the menu option to be changed highlighted, press the right controller key; the
settings will be displayed with the current setting highlighted.
• To return to the menu options, press the left key.
Use the up/down keys to highlight the new
setting.
• If “Enter” is displayed, press the center
button to continue.