Installing aa batteries attaching the hand strap, Installing aa batteries, Attaching the hand strap – Minolta Dimage F100 User Manual
Page 15
15
Although performance is better with a CR-V3 lithium battery, two AA-size Ni-MH batteries can also
be used. Other types of AA batteries should not be used. When using Ni-MH batteries, fully recharge
them with a battery charger suitable for complex electronic equipment. Please consult your vendor
about an appropriate charger.
Installing AA batteries
Install the AA batteries as shown in the diagram; make sure the
positive and negative battery terminals are oriented correctly.
Always keep the strap around your wrist incase the camera is accidentally
dropped.
Attaching the hand strap
Pass the small loop of the hand strap through the strap eyelet on the camera
body (1).
Pass the other end of the strap through the small loop and
tighten (2).
1
2
An optional leather neck strap, NS-DG200, is also available
from your Minolta dealer.