Motorola USBW 100 - Manual (Page 42)

Creating and Managing Network Profiles
data encryption box should remain unchecked and no further
configuration is necessary on this page.
If the network does use WEP or WPA encryption, check the Enable data
encryption box and configure the WiFi data encryption settings (click here
for instructions).
Profile Properties: WiMAX
The Motorola Connection Manager will have a default WiMAX profile.
Profile Properties: General
This tab contains settings that apply to all types of Network Profiles.
Note: Some of these options may not be available if you are configuring a
profile created by your network service provider.
Profile Name
Enter a name for this network profile. This is how the network profile will
be displayed in the Network Profiles window.
Connection Options
This setting controls what the Motorola Connection Manager will do when
it detects the network you are configuring. There are three options:
• Select Automatic if you want the Motorola Connection Manager to
automatically connect to this network whenever it is detected.
• Select Prompt me if you want the Motorola Connection Manager to ask
you whether to connect to this network each time the network is
detected.
• Select Manual if you only want to connect to this network manually (by
selecting it from the list of networks and clicking Connect ).
VPN Auto Launch
Check this box if you would like to automatically launch your default VPN
profile when you establish a connection to this network.
USBw 100
MAR 2009 37