Motorola HDT101 - Manual (Page 51)

45
TROUBLESHOOTING
If you encounter a problem with your HDT101, review this
troubleshooting section before calling your service provider. This
information will help you quickly solve a problem. If you’re unable to
solve the problem, contact your service provider.
Problem Possible Solutions
The
POWER
LED on
the front panel does
not light up
Confirm the power cord is plugged into a functioning
power outlet.
Press POWER on the front panel to see if the LED
lights up.
Determine if the HDT101 is in standby mode by
pressing
STANDBY on the remote control.
No picture Verify that all cables are connected properly
(hand-tighten if necessary).
If you are watching TV using your VCR, be sure your
VCR is on.
Verify that the TV is directed to the proper input
source.
Your TV may not support the current video output
format. Press
V
.
FORMAT to try another format.
Poor picture
quality Verify that all cables are connected properly
(hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
Check the signal’s strength and quality. Press
INFO
to
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.