Motorola HDT101 - Manual (Page 44)

38
Reset Data
To erase your settings and restore the HDT101’s default settings:
1
Press
MENU
on the remote control. The main menu is displayed.
2
Highlight Installation and press
SELECT
. The Password window is
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
4
Highlight Reset Data and press
SELECT
. The message “Are you
sure?” is displayed. This message is a reminder that your customer
settings will be replaced by the default settings.
5
Press the W key to highlight Yes and then press
SELECT
.