Motorola HDT101 - Manual (Page 49)

43
Connecting your A/V Receiver, VCR, and Stereo TV
1
Connect a coaxial cable to the
S
/
PDIF OUT
connector on the HDT101
and the
SPDIF
input connector on the A/V receiver.
When using the digital audio output (
S
/
PDIF OUT
), the left/right
baseband audio connections from the HDT101 to the A/V receiver
are not needed.
2
Connect a video cable to the
VIDEO
connector on the HDT101 and
the
CABLE
/
TV VIDEO
connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard-definition video quality than
composite video.
3
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
4
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
5
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR OUT
connector on the A/V receiver.
6
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR IN
connector on the A/V receiver.
7
Connect a video cable to the
INPUT VIDEO
connector on the stereo TV
and the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V receiver.
To switch between viewing input from your VCR and input from your
HDT101, change your A/V receiver’s video inputs.