Motorola T6210 - Manual (Page 47)

Other Im
por
tant Featur
es
45
Scanning (Continued)
To start scanning, briefly press ) (Scan/Monitor). Your channel/code screen displays
h and begins to scroll through channels. When the radio detects channel activity, it stops
on that channel and displays its channel and code. You can talk to the person(s)
transmitting without having to switch channels by pressing
M
. To stop scanning, briefly
press ) . If you press
M while the radio is scanning, the radio will transmit on the
channel you selected before you activated Scan. If no transmission occurs within five
seconds, scanning will resume.
If you want to scan channels without interference eliminator codes, change the code
for your set channel to
0 before you briefly press
)
.
Auto Power Off
You can program your radio to turn itself off after a certain period of inactivity. This
helps save battery life.
After you exit the menu, O displays on the screen when the automatic power off
feature has been activated. Five minutes before the radio shuts off, an alert beep
sounds. Another alert beep will sound once per minute and O will flash
continuously during those five minutes.
Select - to turn off the automatic power off feature.
To set the automatic power off feature, press \ as needed to
display O. Press [ or ] to set the number of hours
1 - 8 , after
which power shuts off. 8
O
2 T6200 body.fm Page 45 Tuesday, February 20, 2001 3:36 PM