Magnadyne M9900CDS - Manual (Page 5)

5
Automatically Programming AM/FM Radio Stations: You can program up to 15
FM radio stations and 10 AM radio stations automatically.
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Push and hold AS/PS button until the display starts scanning for a
radio station. The radio will automatically program the 5 strongest sta-
tion into preset memory.
Recalling AM/FM Radio Stations:
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Push button 1, 2, 3, 4 or 5 to recall a pre-programmed
radio station.
Automatically Recalling AM/FM Radio Stations:
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Push the AS/PS button and release to automatically scan every 5 seconds
the through pre-programmed radio stations. To stop scanning push the
AS/PS button again.
Weather Band: Push W-BND button to immediately access the weather band.
The radio will search for the strongest weather band signal in your area.
Scan Tuning: Push the TUNE button (3) to scan every 5 seconds through all
7 weather band stations. To stop scanning push the TUNE knob again.
Weather Band Radio Operation
LOC
4 X 50 WATTS
PUSH
SCAN/S-MOD
PUSH SEL/
MENU
Preset AM/FM Radio Stations (continued)
BAND W-BND
MODE AS/PS
ELAPSE
BAND W-BND
2 3 4 5
MEMORY REPEAT PROGRAM SHUFFLE INTRO
BAND W-BND
MODE AS/PS
BAND W-BND
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
Sound Controls
Volume Control: Rotate the VOLUME knob to the right to increase levels or
left to decrease levels.
Bass, Treble, Balance and Fader Controls: Push and release the VOLUME knob
to scan between the different sound controls. Once the desired function is in
the display area rotate the knob left or right to achieve the desired level.
Bass Control: The bass control adjusts the amount of low frequency that
you hear.
Treble Control: The treble control adjusts the amount of high frequency
that you hear.
Balance Control: The balance control adjusts the amount of sound output
to the left and right speakers.
Fader Control: The fader control adjusts the amount of sound output to
the front and rear speakers.
VOLUME
PUSH SEL/
MENU
VOLUME
PUSH SEL/
MENU
VOLUME
PUSH SEL/
MENU
M9900CDS-UM 4/26/06 14:21 Page 5