Magnadyne M9900CDS - Manual (Page 10)

10
Channel Skip Sirius Satellite Radio
Programming Channel Skip for Satellite Radio Stations: You can program
the radio to skip channels which you do not want.
1. Tune to the station to be skipped (see Sirius Satellite Radio Operation
for more details).
2. Push the TUNE knob until “SET SKIP” appears in the display.
3. Push the BAND button and “SKIP” will appear flashing in the bottom of
the display. When the “SKIP” stops flashing the channel has been pro-
grammed to skip.
Release Channel Skip for Satellite Radio Stations:
1. Push the TUNE knob until “DIRECT” appears in the display.
2. Rotate the TUNE knob and select the first digit of the skipped channel (0
or 1).
3. Push the TUNE knob again.
4. Rotate the TUNE knob and select the second digit of the skipped channel
(1-8).
5. Push the TUNE knob again.
6. Rotate the TUNE knob and select the third digit of the skipped channel
(1-9). The tuner will start playing the station you have selected when the
third digit stops flashing.
7. Push the TUNE knob until “SET SKIP” appears in the display. After a few
seconds the radio channel will appear in the display with “SKIP” flash-
ing at the bottom.
8. Push the BAND button and “SKIP” will stop flashing in the bottom of the
display. When the “SKIP” disappears the channel has been released from
Channel Skip.
BAND W-BND
ENTER
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
BAND W-BND
ENTER
Auxiliary Input
Selecting Auxiliary Input: Push the MODE button until “AUX1” or “AUX2”
appears in the display which indicates that the auxiliary unit is playing
through the M9900CDS.
Note: All sound controls (pages 5-6) are active when the Auxiliary source
is playing.
MODE AS/PS
M9900CDS-UM 4/26/06 14:21 Page 10