Memorex MPH2410 User Manual

Page 19

SETTING THE VOICE MAIL

This unit enables you to store the Voice Mail Post Code number in your area. This
will automatically connect you to the Voice mail server provider with one touch
dialing. Set the Voice Mail setting while in the Standby mode as follows:

Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.

Press the Scroll Down button ❶ eight
times or the 9 key button ❷; the Voice
Mail setting will appear.

Press the EDIT/FLASH button to
change the setting; the Voice Mail
setting will blink.

Use the Key buttons (0-9) to enter the
phone number used to access your
voice mail messages (up to 15 digits).

When the desired Voice Mail number
has been set, press and hold the
SAVE/RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.

You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.

SET-UP INSTRUCTIONS (CONTINUED)

MPH2410.O/M.QXD 3/7/03 9:35 AM Page 18