Memorex MPH2410 User Manual
Page 15
14
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE LCD CONTRAST
If you find the LCD screen difficult to read, set the contrast level while in the
Standby mode as follows:
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
1
Press the Scroll Down button ❶ four
times or the 5 key button ❷; the
Contrast setting will appear.
2
1
2
Press the EDIT/FLASH button to
change the setting; the Contrast
setting will blink.
3
Press the Scroll Up ❶ or Down ❷
button to adjust the Contrast level.
2
1
4
When the desired Contrast setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
5
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
6
MPH2410.O/M.QXD 3/7/03 9:35 AM Page 14