Mazda 2006 5 - Manual (Page 173)

Black plate (173,1)
NOTE
l For an optimal cabin temperature, set
the temperature close to
“25.0”
(
“77.0”). Adjust to the desired
temperature if necessary.
l 25.0 (Celsius display)
l 77.0 (Fahrenheit display)
l Setting the temperature to maximum
high or low will not provide the
desired temperature at a faster rate.
l When selecting heat, the system will
restrict airflow until it has warmed to
prevent cold air from blowing out of
the vents.
qWindshield Defrosting and Defogging
Press the windshield defroster switch.
In this position, the
position is
automatically selected, and the air
conditioner automatically turned on. The
air conditioner will direct dehumidified air
to the front windshield and side windows
(page 6-4). Airflow amount will be
increased.
WARNING
Foggy Windshield:
Using the
position with the
temperature control set to the cold
position will cause the outside of the
windshield to fog up. Your vision will
be hampered, which could lead to a
serious accident. Set the temperature
control to hot or warm position when
using the
position.
NOTE
Use the temperature control dial to
increase the air flow temperature and
defog the windshield more quickly.
qSunlight/Temperature Sensor
The fully automatic air conditioner
function measures inside and outside
temperatures, and sunlight. It then sets
temperatures inside the passenger
compartment accordingly. Don't obstruct
the sensor.
Sunlight sensor
Interior Comfort
Climate Control System
6-15
Mazda5_8U38-EA-05D_Edition1 Page173
Monday, March 28 2005 2:17 PM
Form No.8U38-EA-05D