How to check the installation, How to check the installation -18 – Moxa Technologies CP-132U User Manual
Page 34
CP-132U Series User’s Manual
3-18
How to Check the Installation
There are three ways to check the installation of the CP-168U Series board.
Device Manager
1. You can check the installation of the board by selecting Start Æ Settings Æ Control
Panel Æ System, to open the System Properties window. Select the Hardware tab, and
then click on Device Manager.
Windows 2000
Windows XP
If the driver installation was successful, you will see the model number of the CP-168U
board listed under Multi-port serial adapters.
You may also expand the Ports (COM & LPT) item to check the status of the COM ports.
If you see a question mark on top of the icon, then the installation might have a problem.
Check the Event Log to determine the reason for the problem.