Moxa Technologies CP-132U - Manual (Page 33)

Software Installation
CP-132U Series User’s Manual 3-17
14. After all files have been copied to the system,
the Completing the Found New Hardware
Wizard window will open to indicate that it
has finished installing “Port 0.” Click Finish
to install the board’s second port.
15. Repeat the above procedure (Step 9 to Step
14) for the rest of the board’s ports. The last
window to open completes installation of Port
7.
12. After all files have been copied to the system,
the Completing the Found New Hardware
Wizard window will open to indicate that it
has finished installing “Port 0.” Click Finish
to install the board’s second port.
13. Repeat the above procedure (Step 7 to Step
12) for the rest of the board’s ports. The last
window to open completes installation of Port
7.