Marantz SR7400 - Manual (Page 31)

28
ENGLISH
BASIC OPERATION
(TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s
standard is 9 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
(Using the SR7400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2. F/P button on the front panel to display the
frequency.
3.
Press the TUNING or button on the front
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the > button until PAGE2 is displayed.
3. Press and hold the SCAN+ (D1) or SCAN–
(D2) button for 1 second or more.
4.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the “Manual tuning” operation.
MANUAL TUNING
(Using the SR7400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel
2. Press the F/P (Frequency/Preset) button on
front panel, to have the frequency appear on the
display.
3. Press the TUNING or buttons.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the > button until PAGE2 is displayed
3. Press the SCAN+ (D1) or SCAN– (D2) button
to tune in the deseired station.
DIRECT FREQUENCY CALL
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the GUIDE on the remote, display will
show “FREQ - - - -”.
3.
Input your desired station’s frequency with the
ten numbered keypad on the remote.
4. The desired station will automatically be
tuned.
DOWN MEMORY TUNING MODE R
MUTE
S-VID
DSS/VCR2 AUX1 VCR1 DVD CD CD-R TAPE TUNER
7.1CH INPUT AUX2 MULTI SPEAKER MULTI S A/B
F/P
DIGITAL
3. 2. 1.
TUNING
TUNER
F/P
(FM) TUNING MODE (AUTO STEREO OR MONO)
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The “ST” indicator is illuminsted when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
“TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the
station in stereo. In such a case, press the MODE
button on the front panel.Or press the TUNER
button and press the the > button until PAGE1 is
displayed. Press the T-MODE (D4) button.
“AUTO” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “ST”
indicator is not illuminated.
To return to auto stereo mode, press the MODE
button or press T-MODE button on the remote again.
AUTO indicator is illuminated the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/AM stations
in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
UP
VOLUME
DOWN G MODE
MUTE
AUX1 INPUT S-VIDEO VIDEO L AUDIO R
S-DIRECT
CD CD-R TAPE TUNER
7.1CH INPUT AUX2 AKER
F/P
DIGITAL
MODE
AV SURROUND RECEIVER SR7400
UP
SELECTOR VOLUME
DOWN MEMORY TUNING MODE CLEAR
MUTE
POWER ON/STANDBY PHONES
ENTER
STANDBY AUX1 INPUT S-VIDEO VIDEO L AUDIO R
S-DIRECT SELECT
DSS/VCR2 AUX1 VCR1 DVD TV CD CD-R TAPE TUNER
7.1CH INPUT AUX2 MULTI SPEAKER MULTI SPEAKERS A/B
F/P
DIGITAL
2.4. 2. 5. 1. 3.
MEMORY TUNING CLEAR
TUNER
1.
To select FM , press the TUNER button on the
front panel.
2. While pressing the MEMORY button, press
the TUNING
button up.
“AUTO PRESET” will appear on the display,
and scanning starts from the lowest frequency.
3.
Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the TUNER button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
TUNING
button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when auto
scanning attains the highest end of all bands. If
you desire to stop the auto preset memory at
anytime, press the CLEAR button.
MANUAL PRESET MEMORY
(Using the SR7400)
1. Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
2. Press the MEMORY button on the front panel.
“– –“ (preset number) starts blinking on the
display.
3. Select the preset number by pressing the
TUNING
or button, while this is still blinking
(approx. 5 seconds)
4. Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified preset
memory location.
RECEIVER SR7400
MEMORY TUNING M CLEAR
S
DSS/VCR2 AUX1 VCR1 DVD TV CD CD-R TAPE
7.1CH INPUT MULTI SPEAKER MULTI SPEAKERS A/B
F/P
2. 4. 3.
MEMORY TUNING
DOWN MEMORY TUNING MODE R
MUTE
S-VID
DSS/VCR2 AUX1 VCR1 DVD CD CD-R TAPE TUNER
7.1CH INPUT AUX2 MULTI SPEAKER MULTI S A/B
F/P
DIGITAL
3. 2. 1.
TUNING
TUNER
F/P
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
1 2
LIGHT
Learning Remote Controller RC1400
1.
TUNER
SOURCE
D4
D5
D2
M
D1
D3
D5
2.
3.
3.
USE PAGE 2
D2
D1
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
1 2
LIGHT
Learning Remote Controller RC1400
1.
TUNER
SOURCE
D4
D5
D2
M
D1
D3
D5
2.
3.
3.
USE PAGE 2
D2
D1
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
1 2 LIGHT
Learning Remote Controller RC1400
1.
TUNER
2 3 1
5 6 4
8
0
9 7
MEMO CLEAR
PREV MUTE
MENU EXIT
GUIDE
TEST CH.SEL SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
3.
2.
GUIDE
2 3 1
5 6 4
8
0
9 7
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCR DVD TV
TUNER
D4
D5
D2
M
D1
D3
D5
VOL CH
USE PAGE 1
D4
2 3 1
5 6 4
8
0
9 7
MEMO CLEAR
PREV MUTE
MENU EXIT
GUIDE
TEST CH.SEL SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
3.
2.
2 3 1
5 6 4
8
0
9 7
MEMO