Getting started – Siemens Xelibri 8 User Manual

Page 4

Getting Started

right page (3)

of SARAH e2, A31008-H9270-A45-2-7619 (20.10.2003, 13:55)

RI Vers

. 2\UGS\SARAH\e2\sarah_getting_started.fm

VAR Language: ENG; VAR i

ssue date: 20-Oktober-2003

Getting
Started

Fitting SIM card

Your service provider supplies your SIM card. If it’s credit
card size, snap out the smaller portion and tidy any
rough edges.
Remove the charger
socket cap (1).
Take care to keep
small objects like the
cap and SIM away
from young children.
Firmly press both sides
of your Xelibri as shown
(2) whilst lifting top of
cover a little (3).
Slide cover towards bottom of phone and remove.
If fitted, remove the battery by lifting the tab at the bot-
tom.

Insert SIM card through
the slot in the side of case,
positioning cut-off corner
as shown.
To replace the battery and
cover, reverse the previous
steps, ensuring the bottom
of cover is engaged before
swinging the top into place.

Charging

Insert the supplied charger into an easily accessible
mains socket of the correct rating and, having removed
the socket cap, plug in with the pins face up.

While it charges, the battery indicator will animate – if it
doesn’t, then see What if...? on p 28.
Be sure to unplug the charger from the mains when
you’re finished.

sarah.book Seite 3 Montag, 20. Oktober 2003 2:24 14