Mitel 5330 IP Phone - Manual (Page 32)

Mitel 5330/5340 IP Phones – User Guide
To activate or deactivate Group Listen while in headset mode:
• Press
the Group Listen key.
Group Paging / Meet Me Answer
Group Paging allows you to page a group of telephones through their built-in speakers. You can
belong to as many as three paging groups with one group designated as your "prime" group.
When you need to respond to a Group Page but don't know the identity or extension number of
the paging party, use the Meet Me Answer feature. You have up to 15 minutes after receiving the
page to use Meet Me Answer.
To make a Group Page:
1. Lift the handset.
2. Press the Direct Page key you programmed, or dial the Direct Paging feature access
code.
3. Do one of the following:
• To page your prime page group, press #.
• To page a specific page group, dial the page group directory number.
4. Speak to the dialed party after the tone.
To respond to a Group Page by using Meet Me Answer:
1. Lift handset.
2. Dial the "Meet Me Answer" feature access code.
3. Do one of the following:
• To respond to a page from your prime page group, press #.
• To respond to a page from a specific page group, dial the page group directory
number.
Headset Operation
To enable Headset Operation:
• Press the key that you have programmed as Headset Mode.
To answer a call (when Auto Answer is disabled):
• Press the flashing line key.
To answer call (when Call Notification is enabled)
• Select
Close and then select the prime line.
To hang up:
• Press (CANCEL).
To mute your headset microphone:
• Press
the (MUTE) key. The light turns ON.
To turn mute off and return to the conversation:
• Press
the (MUTE) key. The light turns OFF.
28