Microtek MHP1-HD - Manual (Page 40)

40
PDP Setup
In the PDP setup menu, you can set the on-screen display language, color temperature, the sleep timer,
or restore factory default settings.
To adjust PDP settings:
1. Press the MENU button to view the main menu.
2. Press the UP/DOWN ( / ) button to select “Setup”, then press the ENTER button.
3. Press the UP/DOWN ( / ) button to select the item you would like to set.
4. Press the LEFT/RIGHT ( / ) button to toggle through option settings for a user setting, then press
the MENU button twice to exit the menu.
The following table describes each item in the Setup menu:
Item Description
Language Sets the on-screen display language to English, Traditional Chinese, etc.
CC Type Controls the caption decoder. Select closed captions (CC1, CC2, CC3, CC4) or
teletext (T1, T2, T3, T4). You can also turn closed captions or teletext on or off
by pressing the CAPTION button on the remote control. This function is available
only in NTSC color system.
V-CHIP A device that enables certain programs that may contain unsuitable content to be
blocked so that children cannot see them. This function is available only in NTSC
color system.
Color Temp Sets color temperature to WARM, DAYLIGHT, or COOL.
Color temperature adjusts the proportion of red and blue colors. A cool
temperature has more blues, and a warm temperature has more reds.
Sleep Sets a time after which the PDP automatically turns off. The available sleep timer
settings are 30, 60, 90, and 120 minutes. You can also set the sleep timer by
pressing the SLEEP button on the remote control.
Default Restores settings to factory default values.