Microtek MHP1-HD - Manual (Page 28)

28
• Adding/Deleting Channels
You can add or delete individual channels using the on-screen
menus, so that the menus do or do not appear when you
move through channels using CH or CH .
To add or delete channels:
1. Select the channel you want to add or remove.
2. Press the MENU button on the remote control or on the
PDP unit.
3. Press the UP/DOWN ( / ) button on the remote control to
select “TV”, then ENTER to confirm your selection.
4. Press the UP/DOWN ( / ) button to select “Edit”, then
LEFT/RIGHT ( / ) to select “Add” to add the selected
channel or “Del” to remove the selected channel.
• Changing Channels
To change channels, use one of the following methods:
– Press the CH or CH button on the remote control or
on the PDP unit to see the channel that the PDP has
memorized.
– To enter a channel number 1-99, use the number buttons
on the remote control. To enter a channel number over
100, first press the 100 button and then the last two
digits of the channel number.
For example, to enter the channel number 121, first press
the 100 button, then 2, then 1.
• Channel Return
The PDP has a channel return feature which allows you to
conveniently return to the previous channel viewed, even
when you don’t remember the channel number.
To return to the previous channel, press the BACK button on
the remote control.
Adjusting the Volume
To adjust the volume, press the VOL+ or VOL– button on the
remote control or on the PDP unit to raise or lower the
volume.
You can also adjust the volume using the on-screen menu.
See the section, “Adjusting the Sound” in Chapter 5: Using
the PDP’s Features.
AIR
STD
ENTER
ADD
OFF