MGE UPS Systems EPS 7000 - Manual (Page 33)

page 2 —5
Users Manual
2.5 Current Measurements
To display current measurements, press the “A” key on the keyboard. See Figure 2-5.
Figure 2-5: Current Measurements Displays.
Operation
Select current measurements by
pressing the
Å
pushbutton
INPUT I1 I2 I3
A RMS
BYPASS I1 I2 I3
A RMS
I LOAD / IN
=
Е
Е
Е
Е
Е
Е
Е
INV. I1 I2 I3
A RMS
LOAD I1 I2 I3
A RMS
% (IN = A)
LOAD I1 I2 I3
CREST F.
Main input (mains 1) currents in AAC RMS.
Bypass input (mains 2) currents in AAC RMS.
Inverter output currents in AAC RMS.
Load currents in AAC RMS.
Highest current drawn by a load phase, relative to
the current rating of the UPS module or SSC (IN).
Load crest factor for each phase.
(Only in UPS modules)
(only in SSC)
(only in UPS modules)