MGE UPS Systems EPS 7000 - Manual (Page 11)

1.0 Scope
This manual provides User instructions for operating the EPS 7000 Shared Systems (S-S). Descriptions include
section descriptions, a general overview of system internal components, circuit breaker diagrams, descriptions for
front panel displays and control indicators.
Please read this manual before installing the EPS 7000 equipment. Please retain this manual for future reference.
1.1 Reference Manuals
The EPS 7000 Installation Manual (MGE part number 86-134003-00) provides detailed operating instructions for the
EPS 7000 Single Module and Shared Systems. The EPS 7000 Single Module Users Manual, (MGE part number
86-134004-00) provides detailed operating instructions for single module systems.
86-134004-00 EPS 7000 Users Manual, Single Module
86-134003-00 EPS 7000 Installation Manual, Single Module and Shared Systems
1.2 Section Descriptions
This manual is divided into four sections:
Section 1 Introduction
This section provides User instructions for operating the EPS 7000 Shared Systems. Descriptions include section
descriptions, a general overview of system internal components, circuit breaker diagrams, descriptions for front
panel displays and control indicators.
Section 2 Operation
This section describes procedures for normal operation of EPS 7000 Shared Systems. Including interactive front
panel display, settings for language configuration, alarms message displays, voltage, current, battery measure-
ments, with before and after start-up checks, emergency shutdown using EPO disconnects, and normal conditions
for using forced transfers.
Section 3 Maintenance
This section describes maintenance of the EPS 7000, including troubleshooting LCD alarm message, safety instruc-
tions, preventive maintenance, isolation for maintenance, and information about replacement parts.
A Glossary in the rear of this manual provides definitions of terms used within the text.
Users Manual
Introduction
I n t r o d u c t i o n
page 1 — 1