MicroBoards Technology QD-DVD User Manual

Page 12

5. Once all of your tracks are selected for that master, press the ▼ button until the display

reads:

This screen shows the total number of tracks selected from the master disc and the total time of
those tracks.

6. Press the ENT button. The following screen appears:

Note: Pressing the ▼ button and selecting NO takes you back to

Editing tracks.

7. Press the ENT button to begin recording the selected tracks to the blank disc. The following

screen appears:

8. Once the tracks are copied to the blank disc, the following screen appears:

9. Press the ESC button to take you to this screen:

If you wish to continue to add more audio tracks to the disc in the recorder drive, press the ▼
button to change the NO to YES. Then press Enter.

The TOP reader drive will open and ask you to put in the next master disc. Place the new disc
into the drive and close the tray. Go to step 3 and repeat the process.

Once you have completed copying the audio tracks to the BOTTOM disc, you will need to close
the disc.

10. At this screen, leave the selection as NO and press ENT:

Once ENT is pressed, the following screen appears:

11. Press the ENT button. The following screen appears:

Once the disc is closed, the following screen appears:

Play Audio Track

The QD-DVD cannot use this function, as the reader drive does not include a headphone jack.

Select Track:
End 1Track 04:53

End Edit Disc
And burn? YES

Copying – 52x Edit
1/16 → 1/1

Burn Complete!
OK: 01

Continue Edit
Next disc? NO

Close all disc’s
Sessions? Yes

Closing Session
Please wait….

Close Complete
OK: 01 Fail: 00