MicroBoards Technology QD-DVD - Manual (Page 11)

11
Disc Info
The Disc Info function displays information on the type of master disc placed in the TOP reader
drive.
To use the Disc Info function, press the ▼▲ buttons until the display reads:
Place the master disc into the TOP reader drive. Press the ENT button. The source is analyzed.
The following screen appears:
The following 4 screens display a variety of information about the master disc. The screens are
reached by pressing the ▼▲ buttons.
Edit Track
The Edit Track function allows you to select multiple tracks from different master discs and place
them on one Audio CD. The maximum number of tracks that can be written to the CD is 99. In
the Edit Track function, there are three options: CD to CD Edit, Play Audio Track and Close
Session.
The Edit Track functions are not applicable to DVD media.
CD to CD Edit
To use the CD to CD function, press the ▼▲ buttons until the display reads:
1. Press the ENT button. The following screen appears:
2. Place the first master audio CD into the TOP reader drive. Place the blank CD into the
BOTTOM writer drive. Press the ENT button and the following screen appears:
3. To select a track that you want to burn to the blank disc, press the ENT button. This will put a
+ symbol in front of that track:
4. Press the ▼▲ buttons to scroll through the tracks on that CD, selecting the tracks you wish
to record.
Select Track:
+ 1/16 04:53
7. Disc Info
Source Disc
(Analyzing)
Total 01 Sessions
Total 01 Tracks Total: 04:15
Total: 37.0MB Session 01
Track 01 - 01 Track 01
CDXA 37.0MB
8. Edit Track
8-01. Edit Track
CD to CD Edit
Select Track:
1/16 04:53