Connecting to tv – Philips Magnavox MRV660 User Manual

Page 12

Text mode
Original mode

English

3139 246 XXXXX

IMPORTANT!
– The progressive scan video quality
is only available through Y Pb Pr
connection and a progressive TV is
required. Turn on the progressive
scan feature after complete the first
installation (see page 24.)
– Before enabling the progressive
scan function, you must ensure that
your TV progressive scan function is
turned on (refer to your TV owner’s
manual.)

Helpful Hint:
– To switch between interlaced and
progressive scan output, press and hold

∞

while reconnect its ~ MAINS to the power
supply. The display panel will show
“Progressive Scan” if the progressive scan
function is enabled.

Connecting to TV

(cont’d)

MRV660_17_Eng40

9/3/05, 10:24 AM