Metrologic Instruments Solaris MS7820 - Manual (Page 21)

17
I
NSTALLATION
C
ABLE
I
NSTALLATION
(S
ECONDARY
M
ETROLOGIC
S
CANNER
)
11. Scan the following bar code to configure the auxiliary port on the MS7820 to
accept a Metrologic scanner as the secondary scanner.
The following bar codes do not apply when using an MS6720 as a
secondary scanner. Contact a Metrologic representative for additional
information on the MS6720. If the secondary scanner is not a
Metrologic scanner refer to Section O of the MetroSelect
Configuration Guide.
³ 9 9 9 9 7 7
Aux Port Defaults
The auxiliary input port’s data format must match the main output
format of the secondary scanner.
12. Scan the following bar codes, in order, to configure the secondary scanner to
match the auxiliary port’s data format.
1
st
Enable AUX Output
2
nd
Secondary Scanner Data
Format
³ 1 2 4 8 1 7 ³ 4 3 7 5 2 0
3
rd
Enable Comm Timeouts
4
th
(Optional)
Turn OFF Secondary
Scanner’s Beeper
³ 1 1 8 4 1 2 ³ 3 1 8 5 0 5
13. Turn on the host system.