Multiplex Technology 8CH - Manual (Page 10)

7
7) “ZOOM ” :
Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).
8) “ ” / “ ” :
Press “ “ button to show the 4 channel display mode.
Press “ ” button to change the setting in the menu.
9) “SEQ” / “ ” :
Press “SEQ” button to activate the call monitor function and press “SEQ” button
again to escape the call monitor mode.
Press “
” button to change the setting in the menu.
10) “POWER” :
Press this button to turn on / turn off the DVR.
(Under recording mode, please stop record before turn off the DVR).
11) “CH1 ” “CH2 ” “CH3 ” “CH4 ” :
Press “1 ” “2 ” “3 ” “4 ” buttons to select the channel.
12) “REC” :
Press “REC” button to activate the manual recording.
13) “PLAY” :
Press “PLAY” button to playback the recorded files.
14) “ UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD “ :
Press “
◄►
“ to move the cursor up / down / left / right.
Under playback mode, press “ “ button to pause playback.
Under playback mode, press “ “ button to stop playback.
Under playback mode, press “ “ button to fast rewind.
Under playback mode, press “ “ button to fast forward.
15) “ ” :
Press these two buttons to select live or playback sounds of the 4 audio channels.
16) “ ” :
Press these two buttons at the same time to enter / exit the PTZ control mode.