MITSUBISHI ELECTRIC MR. SLIM MCF-D24VD - Manual (Page 6)

En-5
• OPERATING INSTRUCTIONS •
Press to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
(AUTO) (Low) (Med.) (High)
1
( ) ( ) ( ) ( ) ( )
2 3 4 5
(AUTO) (SWING)
I FEEL COOL
DRY FAN
I FEEL COOL
DRY FAN
AMPM
AMPM
I FEEL COOL
DRY FAN
I FEEL COOL
DRY FAN
AMPM
AMPM
T
IMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly. Page 3
2
Press and to set the time of timer.
Each time is pressed, the set time increases by 1 hour; each time
is pressed, the set time increases by 10 minutes.
3
Press or again to cancel timer.
Note:
• ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
• If power failure occurs while ON/OFF timer is set, see page 4 “Auto restart
function”
Airflow direction
(AUTO) .............The vane is set to the most effi cient airfl ow direction.
Floor standing unit:
COOL/DRY: upward. FAN: horizontal.
Ceiling suspended unit:
COOL/DRY: horizontal. FAN: downward.
(Manual) .......For effi cient air conditioning, select position 1 or 2 for COOL/DRY.
During COOL/DRY, when the vane is set to position 4 or 5,
vane automatically moves to position 1 after 1 hour to prevent
water dripping.
(Swing) .............The vane moves up and down intermittently.
■ To change the horizontal airfl ow direction.
Move the vertical vane manually before starting operation.
Floor standing unit Ceiling suspended unit
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT