Motion Computing MOTION C5 - Manual (Page 20)

14 Chapter 2 Features
DataGuard
Your system includes the DataGuard feature, which detects shocks, extreme vibrations, and
falls. If a fall, shock, or vibration is detected, DataGuard moves the drive heads away from
the disk, which can prevent hard drive failures and data loss. For more information, go to
Control Panel and open DataGuard.
Camera
You can use the built-in 2-megapixel auto-focus camera to take pictures and save them to
the hard disk drive. The camera lens is on the back of the unit, and includes a light to
illuminate the subject. The camera produces pictures in BMP format with a resolution up to
1600 × 1200 pixels.
The following table shows detailed specifications for the camera.
For information about using the camera, see “Using the camera” on page 29.
Item Value
Sensor array CMOS sensor 2.0 megapixel
Pixel size 3.0μm x 3.0μm
Optical format 1/3”
S/N ratio 40dB
F number 2.8
Focus Auto focus @ 10cm ~ infinity
Image resolution 1600 x 1200
1280 x 1024
1024 x 768
800 x 600
640 x 480
320 x 240
Frame rate 2M @ 11fps: 1.3M @ 15fps
VGA @ 30fps
QVGA @ 30fps
(MJPEG mode)
White balance Automatic
Exposure Automatic