Metz MF 55TK36 - Manual (Page 18)

- 16 -
press “ ” or “ ” button. To cancel APS dur-
ing running press “ ” or “ ” button.
After APS is finalized, a programme list will
apper on the screen. In the programme list
you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and / or the
programme names of programmes, you
can change them in Programme menu.
Other Features
TV Status
Programme Number, Programme Name
(or AV), (they are displayed on the upper left
of the screen) and Sleep Timer (shows the
time left on the upper right screen if en-
abled). In stereo options the sound indicator
is displayed with them too. They are dis-
played after programme change during 3
seconds.
Programme Number
Programme Name (5 characters)
These OSD’s are displayed when a new
programme is entered by digit button, by
pressing “
” button, or by “P+“ or “P-” but-
ton, or by “TV” button.
Programme Swap ( )
This button is used to reenter to the preced-
ing entered programme again. Pressing
"
" consecutively allows to swap into two
last entered programmes.
Double-digit (- -)
This OSD is displayed when the "Double-
Digit" button pressed in place of the pro-
gramme number indicator.
After then, in order to enter a programme it
must be pressed to two digit consecutively.
When it is late to press any digit button this
function will be ignored and the display will
be erased. In the same way it must not be
late to press any digit button after entering
the first digit. The limit of the delay time is 3
seconds.
Personal Preferences ( )
All the preset values will be restored, when
pressing " ".
Sound Indicator
This is a stereo option. The alternatives of
the indicator are Mono, Stereo, Dual I and
Dual II. This indicator is displayed under the
programme number indicator on the screen.
"I-II" button is used to select Mono or Stereo,
or Dual I or Dual II.
In Mono broadcast or in forced-mono (for
stereo broadcast).
In Stereo broadcast.
If dual broadcast detected. Dual I is selected
in default and also can be selected after
Dual II by Remote Control.
If Dual II selected by Remote Control.
Sleep Timer Last Minute Indicator
It is displayed on the upper right of the
screen. If sleep timer is activated it is dis-
played with the TV status and erased with it
after 3 seconds.
If there is left only one minute of the down
counting of the timer, it is displayed auto-
matically on the upper left of the screen, and
stayed there until finishing. Then TV goes
automatically to stand-by.
Mute Indicator
It is placed in the upper middle of the screen
when enabled, and it stays there until it is
disabled.