M-AUDIO AP-012403 - Manual (Page 17)

Audiophile USB MIDI Setup
The Audiophile’s MIDI input and output ports may be connected to
external MIDI devices.The following diagram shows connection to a MIDI
keyboard instrument, which is also being used as a sound module.The MIDI
output of the Audiophile USB may be used with just a sound module, while
the MIDI input may alternately be used to receive MIDI time code for
synchronization purposes.
1. Connect the MIDI out port of your controller keyboard to the
Audiophile’s MIDI In port using a standard MIDI cable.
2. Connect the Audiophile’s MIDI Out port to the MIDI in of your keyboard
instrument (or a sound module), also using a standard MIDI cable.
3. Connect the audio outputs of the keyboard to either a mixer, sound
system, or the audio inputs of the Audiophile USB.
The Audiophile USB MIDI drivers, once enabled in your software’s MIDI
Setup, will appear as a MIDI source and a MIDI port within that program’s
track configuration windows. The MIDI input driver is named “In
Audiophile USB”, and the MIDI output driver is named “Out Audiophile
USB”. Some software applications allow you to redefine/rename these
devices per supplied or manually entered instrument definitions.
Audio Out
USB
MIDI In
MIDI Out
MIDI Out
MIDI In
Front
Rear
Keyboard Synth
Audiophile USB
Computer
Sound System
17