Motorola LS355 - Manual (Page 12)

12
Setting Date and Time
1. Slide the button to M position.
2. Press and hold the button for
2 seconds. The pager displays:
3. Slide the button to the N position or
return it to M position to choose 12
hour or 24 hour mode.
4. After choosing 12 hour or 24 hour
mode, press the button again to set
time and date. Slide the button to the N
position to choose the number which
you want to change (the number you
choose will flash), then press the but-
ton to enter the number.
5. Slide the button between N and M posi-
tion to shift the cursor.
6. To return to standby mode at any time
during the date and time setting proce-
dure, allow the pager to time-out for 8
seconds.
12 HOU
24 HOU
80309P61-O.book Page 12 Tuesday, April 22, 2003 1:38 PM