Microsoft PRO 906EX - Manual (Page 140)

Copier/Document Server Features
132
4
• Stamp Position
You can adjust the print position of the stamp within the available range
as shown below.
Metric version:
• "Top Left"…T/B: 4-144mm, L/R: 4-144mm
• "Top Center"…T/B: 4-144mm, L/R: 72-72mm
• "Top Right"…T/B: 4-144mm, L/R: 4-144mm
• "Center Left"…T/B: 72-72mm, L/R: 4-144mm
• "Center"…T/B: 72-72mm, L/R: 72-72mm
• "Center Right"…T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"…T/B: 4-144mm, L/R: 4-144mm
• "Bottom Center"…T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"…T/B: 4-144mm, L/R: 4-144mm
Inch version:
• "Top Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
• "Top Center"…T/B: 0.1-5.7”, L/R: 2.8-2.8”
• "Top Right"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
• "Center Left"…T/B: 2.8-2.8”, L/R: 0.1-5.7”
• "Center"…T/B: 2.8-2.8”, L/R: 2.8-2.8”
• "Center Right"…T/B: 2.8-2.8”, L/R: 0.1-5.7”
• "Bottom Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
• "Bottom Center"…T/B: 0.1-5.7”, L/R: 2.8-2.8”
• "Bottom Right"…T/B: 0.1-5.7”, L/R: 0.1-5.7”
• Size
You can set the size of the stamp.
• 1X
• 2X
• 4X
• Density
You can set the pattern used to print the stamp.
• Normal
The stamp is printed on the image. You cannot check which parts will
overlap.
• Lighter
The image can be seen through the stamp.
• Lightest
The image appears even clearer than in the Lighter setting.