Marantz SM-1151 - Manual (Page 26)

20
ENGLISH
HOW TO USE AND SET FEATURES
REMOTE POWER CONTROL
By connecting this unit to a Marantz SC-11S1 stereo control
amplifier using the remote power control connection, the power
controls of this unit are operated in sync with the SC-11S1
power ON/OFF controls.
The SC-11S1 has two trigger output terminals, therefore two
SM-11S1s can be connected to one SC-11S1.
1. Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11S1s to
be connected. Either of the following types of connection
cables are adequate.
Caution:
Do not use connecting cables that contain resistance.
• Monaural miniplug monaural miniplug connecting
cable
• Stereo miniplug stereo miniplug connecting cable
2. Check that the power to the unit and SC-11S1 that will be
connected to it are both OFF.
3. After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the unit to ON.
4. Press the POWER ON/OFF switch on the unit to switch to
standby mode.
5. In this condition, press the POWER ON/OFF switch on the
SC-11S1, and the power of the SM-11S1 will switch ON in
sync.
AC IN
REMOTE POWER CONTROL
TRIGGER OUT
1 2
AC IN
ON
OFF TRIGGER IN
REMOTE POWER CONTROL
AC IN
ON
OFF TRIGGER IN
REMOTE POWER CONTROL
REMOTE POWER CONTROL
TRIGGER OUT
1 2
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
ON
OFF
TRIGGER IN
REMOTE POWER CONTROL
SC-11S1
SM-11S1
SM-11S1
Set to ON
Set to ON