Helpful hints – Philips Magnavox VRZ342AT User Manual
Page 41
VAR.SLOW
VCR
TV
CBL/DBS
VOL.
CH.
MUTE
+100
3
6
9
0
2
5
8
1
4
7
TRACKING
F.ADV
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD
REW
MEMORY
X2 PLAY
SLOW
VCR PLUS+
/ENTER
QUICK
TIME
INDEX
SEARCH
REC END
SKIP
EJECT
MENU
CLEAR
PAUSE/STILL
Setting Up the VCR Plus+ Programming System (cont’d) 41
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR
Plus+ and Cable/TV channels do not match, you must tell the VCR
the VCR Plus+ and Cable/TV channel numbers by following steps
3 - 7. Make each entry within 60 seconds of the previous entry.
3
Press the VCR button, then press the MENU button.
6
Look at the lists you filled in on page 40. For stations whose VCR
Plus+ and Cable/TV channels do not match, press the
PLAY/o button or the STOP/p button until the arrow is
beside the VCR Plus+ channel you need. Then, press the
Number buttons to enter the corresponding Cable/TV chan-
nel from your list. (Enter a “0” before single-digit channels.) Enter
all the stations on your list.
Note: If you are using a Cable Box/DBS, the Cable/TV channel will be
03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+
channel. You must set the Cable Box/DBS to the channel you want to
record; leave the Cable Box/DBS on for the timer recording.
7
Press the STATUS/EXIT button.
• To erase a Cable/TV channel num-
ber, repeat steps 3-5 on this page.
Then, press the PLAY/o button or
the STOP/p button to select it.
Press the CLEAR button, then press
the STATUS/EXIT button.
• To select line input for the Cable/TV
channel, press 0,0. AUX will appear
on-screen.
• When you receive the VCR, all the
VCR Plus+ channel numbers and
Cable/TV channel numbers are the
same.
Helpful Hints
SELECT op CHOOSE B
→
REPEAT PLAY
OFF
ON SCREEN MODE
LANGUAGE
VCR PLUS+ REF. MAP
DBS RECORD LINK OFF
TO END PUSH EXIT
5
Press the PLAY/o button or the STOP/p button to select
VCR PLUS+ REF. MAP, then press the F.FWD/B button.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+
CABLE/TV
98
98
99
99
1
– – – – –> 23
2
2
TO SELECT CH PUSH op
THEN ENTER CH NO.
TO END PUSH EXIT
VCR PLUS+ CROSS REF. MAP
VCR PLUS+
CABLE/TV
98
98
99
99
1
– – – – –>
1
2
2
TO SELECT CH PUSH op
THEN ENTER CH NO.
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
2
Examine the lists on
page 40.
4-5
7
3
6
VRZ342comb.QX33 4/7/99 10:06 PM Page 41