Philips Magnavox VRZ342AT - Manual (Page 23)

VAR.SLOW
VCR TV CBL/DBS
VOL.
CH.
MUTE +100
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
X2 PLAY
SLOW
VCR PLUS+
/ENTER
QUICK TIME INDEX
SEARCH
REC END SKIP
EJECT
MENU CLEAR
PAUSE/STILL
Remote Locator 23
PRESS MUTE THEN
PAUSE KEY
TO CHANGE CODE FROM 4
TO END PUSH EXIT
YOUR REMOTE LOCATOR
CODE IS 4
PRESS ANY DIGIT
TO CHANGE CODE
TO END PUSH EXIT
YOUR REMOTE LOCATOR
CODE HAS BEEN CHANGED
NEW CODE IS 3
TO END PUSH EXIT
Letting your VCR find your remote for you...
1
Press the POWER button on the VCR to turn on the
VCR. Your remote control beeps and LOCATING REMOTE
appears on-screen. The remote control will beep for about 30
seconds. (The exception is when you plug the VCR power cord
into the wall outlet for the first time.) Or, press any button on
the remote control to stop the beeping.
If another remote control beeps...
The VCR may find other remote controls. If this occurs, follow
the steps below to program the VCR to find only its remote con-
trol.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
REMOTE LOCATOR, then press the F.FWD/B button.
3
Press the MUTE button, then press the PAUSE/STILL
button.
4
Press one Number button (0 - 9) to enter a new single-digit
code for your remote control. Your remote control will beep
briefly.
5
Press the STATUS/EXIT button.
If another remote control beeps...
5
2
1
4
3
3
• If there are no batteries in the
remote control, the remote locator
feature will not operate.
Helpful Hint
This device complies with part 15
of the FCC Rules. Operation is sub-
ject to the following two condi-
tions: (1) This device may not cause
harmful interference, and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
VRZ342comb.QX33 4/7/99 10:06 PM Page 23