Motorola GM380 - Manual (Page 43)

41 English
UTILITIE
S
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls/
noise (a “nuisance” channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Delete operation:
1. While the radio is on the Nuisance Chan-
nel, press and hold the Nuisance Delete
button until you hear the scan start alert
tone.
2. Release the Nuisance Delete button.
Note: You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one
remaining channel in the scan list.
ADDING A DELETED NUISANCE CHANNEL
BACK INTO THE SCAN LIST
Using the Scan Button
1. Press the Scan button to stop scanning.
The scan stop alert tone will sound.
2. Press the Scan button again to re-start
scanning. The scan start alert tone will
sound, and the scan list will contain all
programmed channels.
Using the Menu
1. Follow the instructions for selecting Scan
On/Off via the menu
2. Select Scan Off. Your radio will stop scan-
ning, the scan stop alert tone will sound,
the display icon
G and the LED indicator
will be extinguished.
3. Select Scan On. Your radio will re-start
scanning, the scan start alert tone will
sound, the display icon
G will be lit , the
LED indicator will blink green and the scan
list will contain all programmed channels.