Motorola GM380 - Manual (Page 21)

19 English
RAD
IO
CALLS
Once the desired address is displayed, there are
two methods to select the address:
Method 1
Method 2
Press the PTT button or Call 1-4 to select address
and make the call.
Call 1-4 are pre-programmed call buttons.
Note: During a call you may enter the contact list
as described above and make another call to
a third party, or initiate a new call. In either
case the call may be a voice or status call.
Keypad Edit
If the radio is displaying a Contact List number, a
Keypad Dialled number or a Status number, the last
digit may be deleted by:
Note: The edited number is not saved at the end of
the call in the contact list, but is saved in the
last number redial.
c to confirm your selection.
Display shows:
(for 2 seconds) Selected
For Aliases, eg:
1 d or f Once
(to select number)
2 d Again
(to delete last digit)
For Numbers, eg:
3 d Once
(to delete last digit)
4 Enter new numbers
5 PTT button to make radio call.
Jack
1234567
123456
1234567
123456
12345699