Motorola GM380 - Manual (Page 25)

23 English
RAD
IO
CALLS
STATUS CALLS
A status is a code for transmitting prearranged
messages, e.g. status “05” may indicate
“Return to Base”. The prearranged messages
and associated code digits are contained in a
Status List which contains up to 255 entries.
This list is used for both incoming calls, when
the status of the calling radio is displayed, and
outgoing calls, when your status is sent either
to a requesting radio or to other radios.
Making a Status Call
When the radio is in the IDLE state or during a
call, the status list may be used to select a
status message to reply to a calling radio or
send your status to another radio.
There are two ways to enter the Status List:
Method 1
Press the Status List direct access button, if
programmed by your dealer.
Method 2
Once in the Status List, there are two ways to
choose the desired status:
Method 1
Method 2 (Manual Dialling)
1 c to enter Menu Mode.
2 + or e until: Status
3 c to select
+ or e until:
f
(e.g On Break)
(e.g. 04)
Enter the desired status
from the
keypad, e.g. 04:
(digit range 00 to 999)
Message Alias
Number
Stat: 04