Motorola VT1000v - Manual (Page 19)

13
VT1000v Series Voice Terminal User Guide
Basic Configuration
To perform basic configuration:
1 On the computer connected to the voice terminal PC port, start a web browser such
as Microsoft
® Internet Explorer or Netscape Navigator ® .
2 In the Address or Location field, type http://192.168.102.1 and press ENTER to
display the Status page, which displays the Motorola voice terminal settings.
3 Click Basic Configuration to display the Basic Configuration window. Its fields are:
Obtain IP
Address
Dynamically
This setting is enabled by default. If either of the following is true, no
configuration on this page is required:
■ If you have a cable modem with no router and your cable provider
assigns IP addresses dynamically, the Motorola voice terminal
obtains its IP address dynamically from your cable provider.
■ If you have a router with DHCP enabled, the Motorola voice
terminal obtains its IP address dynamically from your router.
Specify Static
IP Address If your broadband provider requires a static IP address, enable
Specify Static IP Address. Type the Static IP Address and IP
addresses for the Subnet Mask, Default Gateway they provide.
Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the
Service Name, User Name, and Password provided by your
DSL provider.
VT1000User.book Page 13 Monday, November 3, 2003 4:19 PM