McCulloch MC30 - Manual (Page 6)

6
PRODUCT SPECIFICATIONS
UNASSEMBLED PARTS
CUSTOMER RESPONSIBILITIES
• Read and observe the safety rules.
• Follow a regular schedule in main tain-
ing, caring for and using your tractor.
• Follow the instructions under “Cus tom er
Re spon si bil i ties” and “Stor age” sec tions
of this own er’s manual.
WARNING: This riding mower is
equipped with an internal com bus tion en-
gine and should not be used on or near any
un im proved forest-covered, brush-covered
or grass-cov ered land unless the engine’s
exhaust system is equipped with a spark
arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it
should be maintained in effective working
order by the operator.
A spark arrester for the muffler is avail able
through your nearest authorized service
center/department.
In the state of California the above is required
by law (Section 4442 of the California Public
Resources Code). Other states may have
similar laws. Federal laws apply on federal
lands.
PRODUCT SPECIFICATIONS
CONGRATULATIONS on your purchase of
a new riding mower. It has been designed,
engineered and manu fac tured to give you
the best possible dependability and per-
formance.
Should you experience any problem you
cannot easily remedy, please contact a
qualified service center. We have com pe tent,
well-trained representatives and the proper
tools to ser vice or repair this riding mower.
Please read and retain this manual. The
instructions will enable you to assemble and
maintain your riding mower prop erly. Always
observe the “SAFETY RULES”.
Gasoline Capacity 1.5 Gallons
and Type: Unleaded Regular
Oil Type SAE 30 (Above 32°F)
(API SG-SL): SAE 5W30 (Below 32°F)
Oil Capacity: 48 Oz.
Spark Plug: Champion RC12YC
(Gap: .030")
Ground Speed Forward: 0 - 4
(Mph): Reverse: 0 - 2
Charging System: 3 Amps @ Battery
Blade Bolt Torque: 45-55 Ft. Lbs.
39
1 532 43 68-48 DECK
2 532 19 28-70 MANDREL ASM
3 532 43 68-56 KEEPER, BELT
4 532 43 68-55 PULLEY, MANDREL
5 532 44 15-97 BELT
6 532 43 68-63 COVER, MANDREL
7 532 43 86-91 LIFT ASM, DECK
10 532 43 96-38 DEFLECTOR
12 532 43 66-47 PIN, HINGE
13 532 43 74-62 SPRING, TORSION
14 532 19 51-85 ARM, MOWER SUPPORT
17 819 19 19-12 WASHER
18 532 19 42-09 PIN
19 532 19 65-39 BOLT, SHOULDER
20 532 19 42-08 PIN COTTER 5/16 BOW TIE LOCK
22 532 44 15-98 LINK ASM DECK
25 532 12 47-88 RETAINER SPRING 1"
26 532 18 76-90 SPACER, MANDREL
27 532 17 39-84 BOLT, MANDREL
28 532 40 02-34 NUT FLANGE LOCK TOP
29 532 41 92-73 BLADE
30 532 19 30-03 BOLT, BLADE
31 532 19 31-97 PULLEY, IDLER
32 532 14 10-43 GUARD, IDLER TUV
34 872 11 06-12 BOLT, 3/8-16 X 1 1/2
35 532 19 94-70 ARM, BRAKE
36 532 13 77-29 SCREW THD ROLL 1/4-20 X 5/8
37 873 90 06-00 NUT, 3/8-16 FLANGE
40 819 17 16-16 WASHER, 16 GA.
48 532 43 68-57 ARM CLUTCHING
49 532 19 90-92 SPACER RETAINER
50 817 00 06-16 SCREW 3/8-16 X 1
52 817 60 04-06 SCREW 1/4-20 X 3/8
53 532 40 18-72 SPRING RETURN DECK
55 532 43 79-88 E-RING 5/16
56 532 43 68-62 ROD ANTI-SWAY
57 819 13 13-12 WASHER 13/32 X 13/16 X 12 GA
59 532 43 68-58 GUARD TUV IDLER
61 532 43 79-47 MULCH COVER ASM
62 532 17 62-05 TRUNION SUSPENSION ARM
63 532 17 59-94 NUT LIFT LINK 7/16-20
64 817 67 06-08 SCREW THDROL 3/8-16 X 1/2
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
RIDING MOWER MODEL NUMBER MC30 (96022001300)
MOWER DECK
PRODUCT NUMBER 960 22 00-13