Remote control functions: care and operation, Operation, Operating the remote control – MITSUBISHI ELECTRIC LT-2220/LT-3020 User Manual

Page 25

Remote Control Functions: Care and Operation

��

�

��

�

��

�

��

�

��

size AA

batteries

Figure 2. Installing the batteries.

Figure 1. Remote Control Functions.

Operation

Installing the Batteries:

(Figure 2)

1. Remove the remote control’s back cover by gently

pressing the ridged tab in the direction of the arrow

and sliding off the cover.

2. Load the batteries, making sure the polarities (+)

and (-) are correct. For ease of installation, install

the negative (-) side first.

For Best Results from the Remote Control:

Be within 20 feet of the equipment.

Do not press two or more buttons at the same time

unless instructed to.

Do not allow to get wet or become heated.

Avoid dropping on hard surfaces.

Do not use harsh chemicals to clean. Use only a

soft, lightly moistened cloth.

Do not mix new and old batteries.

Do not heat, take apart, or throw batteries into fire.

Use only AA batteries.

Operating the Remote Control:

You can use the remote to control the TV, CABLE/

DBS/DTV, VCR, DVD, and AUDIO products.

Select the product you want to control by moving the

slide switch to the appropriate position. The remote

control has been preset to operate the TV and other

Mitsubishi products. To program the remote control

to operate other products, see Use of the Remote

Control with Other A/V Products, page .

The remote control may return to its initial setting

when the batteries are changed. You may need to

reprogram.

LCD Monitor 5 8 03.indd

5/8/2003, 3:02 PM