Connecting an audio receiver, Stereo audio system, A/v receiver – MITSUBISHI ELECTRIC LT-2220/LT-3020 User Manual

Page 17

Connecting an Audio Receiver

Stereo Audio System

(recommended for shelf units or A/V receivers without

digital audio inputs)

(Figure 7)

1. Connect the audio cables from AUDIO

OUTPUT on the TV side panel to TV IN or AUX

IN terminals on the back of the audio system.

• The red cable connects to the R (right) channel

• The white cable connects to the L (left) channel

2. Turn off the TV’s speakers through the AUDIO/

VIDEO SETTINGS Menu, page 50.

3. Set the audio system’s input to the TV or AUX

position to hear the TV’s audio through your

stereo system.

A/V Receiver

(Figure 8)

1. Connect either a video cable or an S-Video cable

(but not both) from VIDEO MONITOR OUT on

the back of the A/V receiver to VIDEO INPUT-1

or INPUT- 2 on the TV side panel.

2. Connect a set of audio cables from AUDIO

OUTPUT on the TV side panel to AUDIO TV

IN on the back of the A/V receiver.

• The red cable connects to the R (right) channel

• The white cable connects to the L (left) channel

Note: The TV side panel and connections shown here are for reference only and may vary by model.

Additional connection cables are not provided

with the TV. They should be available at most

electronic stores.

Figure 7. Connecting the Stereo Audio System.

Figure 8. Connecting the A/V Receiver.

Note:

Please see your A/V receiver Owner’s Guide for more

detailed connections.

These types of audio connection do NOT support

multi-channel digital audio. Please refer

to your

other devices Owner’s Guide to verify.

��

�

��

�

��

�

��

�

LCD Monitor 5 8 03.indd

5/8/2003, 3:02 PM