Mitel 5207 User Manual
Page 6
MITEL Networks 5207 IP Phone
User’s Guide
2
Rev. 012805
Important Note for Headset Users:
Mitel Headsets with Feature Control Switch must be installed in the dedicated
headset jack (the jack nearest the front of the set). Installation will disable your
handset microphone. Disconnecting the headset at the jack or at the quick-
disconnect plug restores handset operation.
Telephone Status Indicators
When Line is
The indicator is
Idle Off
Busy On
Ringing Flashing
slowly
On hold at your set
Flashing rapidly
On hold at another set
Flashing slow on/fast off
For Users on Resilient 3300 ICP Systems
If during a call, you hear two beeps repeated every 20 seconds, it means that
your phone is switching to a secondary 3300 ICP system. The call continues but
the keys and features on your phone stop working. They keys and most features
begin working again after you hang up. Normal operation resumes when your
phone switches back to the primary system. If your phone is idle and switched to
the secondary system, you’ll see a flashing rectangle on the display. The
rectangle remains until the switch to the primary system is complete.